AUTOMATIC METER READING
Push Type Remote Meter Reading
i-Meter AMR System
The intelligence of the AMR System is built into the AMR Gateway; It can read meters of different communications protocols all in the same box. The AMR iTerminal polls the meters connected to any of its communication ports, ie. LoRa, Radio, Optical, and RS485. Once the all the meters are read, it will PUSH the meter data on to the MDCS Server, and then stores the data to the Database Server
Centralized Automated Meter Reading System
The Centralized Automated Meter Reading System is a system that will collect meter data (Energy, Voltage Current, Power, Load Profile etc..) from each metering point and these data will be stored on central server at Head Office.
AMR 485 GSM Modem
Cinterion TC65i GSM/GPRS Module
Quad-band: 850/900/1800/1900 MHz
GSM release 99
RF Output power:
Class 4 ((2 W) for EGSM 850 and 900
Class 1 ((1 W) for GSM 1800 and 1900
AT commands Hayes GSM 07.05 and GSM 07.07
SIM application toolkit release 99
Ambient temp. range:
30 to +65 °C
Automatic switch off at +75 °C
RP100 Remote Terminal Unit
I/O
6 Optically isolated digital inputs
2 Relay outputs
2 Analog inputs
Communications
100baseT Ethernet Port
Power Supply
9 to 36Vdc or 90 to 260Vac
Expandability
Input/Output Ports are expandable via the serial port
RSX232 Serial to Ethernet Bridge
External Device Server
Network virtually any device in minutes
Access, monitor and control equipment over Ethernet
Replace dedicated PCs and/or modem lines with fast and reliable Ethernet networking
Configure quickly and easily via HTTP, DHCP, Telnet, or serial
Supports RS232, RS422 and RS485 communications
Features & Specifications
Serial Interface
Interface: Software-selectable RS232, RS422 or RS485 (2 and 4 wire support)
Connectors: 1 DB25F DCE serial port
Data Rates: Software-selectable baud rate from 300 to 230 KBaud
Serial Line Format
Characters: 7 or 8 data bits
Parity: odd, even, none
Stop Bits: 1 or 2 Control
Flow Control
Signals: CTS/RTS (Hardware)
Flow Control: XON/XOFF (Software)
Network Interface
Interface: 10Base-T/100Base-TX Ethernet port
Software selectable Ethernet speed 10/100/Auto
Software selectable Half/Full/Auto duplex
Connectors: RJ45
Standards: ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, SNMP TCP, UDP, and Telnet, TFTP
SS6027R-72RF Super Micro Server
Technical Specification
1 x 2.0GHz Six Core Xeon E5-2620V2 Dual Capable
Chipset/FSB: Intel C602
2 x 8GB DDR3 1600 ECC Reg. in 16 DIMMs
Expansion slot: 1 PCI-E 3.0 x16 slot
6 PCI-E 3.0 x8 slots
(All Low Profiles)
LAN: Intel i350 Dual Gigabit LAN
VGA: onboard graphics controller
IPMI 2.0 + KVM w/ Dedicated LAN
LSI2208 6Gbps SAS/SATA onboard controller
2 x 500GB SATA Storage HDD
RAID 0, 1, 5, 6, 10 support
8 x 3.5″ Hot Swap SAS/SATA drive bays
Slim DVDRom
Power Supply: 740W Platinum-Level Redundant
Cooling System: 3 x 8cm heavy duty fans
Form Factor: 2U Rackmount